This guide outlines the process to configure Gryphon scanners to enable EAN128 barcode functions, allowing them to scan MS1 codes.

Prerequisites

• Gryphon scanner device
• Configuration barcodes below for enabling EAN128
• Access to a computer or device to download configuration barcodes (if not already provided)

Steps

1. Power On the Gryphon Scanner
   • Ensure the scanner is powered on and properly connected (via USB, Bluetooth, or other interface as applicable).
   • Verify the scanner is in a ready state, typically indicated by a steady light or beep.
2. Scan the EAN128 Configuration Barcodes

3. Test the Scanner with an MS1 Code

• Obtain a sample MS1 code (a type of EAN128/GS1-128 barcode).
• Scan the MS1 code with the Gryphon scanner to verify that it reads correctly.
• Check the output on the connected device (e.g., computer or POS system) to ensure the MS1 code data is captured accurately.