This guide will help you get your Zebra ZT230 or ZT231 printer working on your Windows computer using Seagull Scientific drivers. Don’t worry if you’ve never done this before—we’ll go step by step!

What You’ll Need

• A Zebra ZT230 or ZT231 printer, plugged in and turned on.
• A computer with internet access.
• The printer connected to your computer (via USB cable or Wi-Fi/network).
• Permission to make changes on your computer (you might need an admin password).

Step-by-Step Instructions

1. Get the Printer Driver:
   • Go to this website: Seagull Scientific Drivers.
   • Find the driver for Zebra ZT230/ZT231 and click to download it.
   • Save the file to your C: drive (e.g., in a folder called “Printer Drivers”).
   • Open the downloaded file and follow the simple instructions to install it. It’s like installing any app—just click “Next” until it’s done.
2. Add Your Printer to the Computer:
   • On your computer, go to the Start menu and search for Control Panel.
   • Click Devices and Printers, then click Add a Printer.
   • Choose whether your printer is connected by USB (like a cable) or over Wi-Fi/network.
   • When it asks for a driver, click Have Disk and find the driver file you saved on the C: drive (in your “Printer Drivers” folder).
   • Pick the Zebra ZT230/ZT231 driver from the list and click Next to finish adding the printer.
3. Set Up Printer Preferences:
   • Find your printer in Devices and Printers (it’ll have a Zebra icon).
   • Right-click it and choose Printing Preferences.
   • Change the settings to match these examples:
     
     • Click Apply to save.
4. Double-Check the Settings:
   • Right-click the printer again and select Printer Properties.
   • Click the General tab, then click Preferences at the bottom.
   • Make sure the settings here look the same as what you set in Step 3.
   • Click Apply again to save.
5. Test Your Printer:
   • In Printer Properties, click Print Test Page to see if it works.
   • If a test page prints, you’re all set! If not, check the printer is on and connected properly.

Tips if Something Goes Wrong

• Printer not printing? Make sure the cable is plugged in or the Wi-Fi is connected. Check the Ports tab in Printer Properties to ensure the right connection is selected.
• Settings look wrong? Go back to Step 3 and double-check the preferences.
• Still stuck? Ask for help from your IT team or visit Seagull Scientific Support.

All Done!